Mecline MV60 Flow Switch at a Glance
The MECLINE MV60 is a water activated switch designed to control the on and off function of pressure washer burners. Unlike pressure switches that activate at 500–700 PSI based on line pressure alone, the MV60 detects actual water flow through your system-ensuring the burner only fires when water is genuinely moving through the coil. Flow switches activate with 1–2 gallons of water flow, making them the preferred choice for lower hot water pressure applications where precise burner control matters most.
What Sets the Mecline MV60 Flow Switch Apart
-
Flow-based, not pressure-based control – Flow switches typically operate under 500 PSI pressure, making them well suited for lower hot water pressure applications. Because the MV60 responds to actual water movement rather than static pressure, it avoids false activation in systems with partial blockages, trapped air, or active bypass circuits.
-
Dedicated horizontal (H) and vertical (V) versions – The MV60 is designed to be installed in both horizontal and vertical orientations, with each version engineered so the internal piston and magnet assembly moves correctly relative to gravity and flow direction.
-
Compact body with 3/8 FPT ports – The MV60's compact design allows for integration into existing plumbing systems without requiring major replumbing. The 3/8" FPT inlet and outlet connections match common pressure washer plumbing, fitting easily into tight runs close to the pump or coil.
-
Consistent switching point – Flow switches activate with 1–2 gallons of water flow, and the MV60 is designed to trigger at a predictable level within that range.
-
Proven use in commercial washer builds – The MV60 appears across a wide variety of OEM parts catalogs and distributor stock lists for hot-water machines.
Product Details:
-
Body material and construction – The MV60 features a brass body that withstands mechanical stress and vibration. Internal components include the magnetized piston and reed switch assembly, with polymer and stainless steel elements designed for sustained contact with pressurized water.
-
Thread size and type – 3/8 FPT (female pipe thread) inlet and outlet, compatible with standard pressure washer plumbing fittings.
-
Maximum flow rate – The maximum flow rate for the MV60 is up to 30 L/min (approximately 8 GPM), with activation typically occurring at 1–2 gallons per minute of water flow.
-
Working pressure – The MV60 operates reliably under extreme working pressures of up to 350 bar (approximately 5,075 PSI), covering most commercial and industrial pressure washer systems.
-
Maximum fluid temperature – The maximum fluid temperature rating for the MV60 is approximately 180°F. The unit should be mounted away from extreme external heat sources to protect internal components.
-
Electrical connection – 2-wire reed switch with lead wires (approximately 62" in length). Rated for 3 A at 250 V.
-
Environmental protection – The MV60 has an IP55 rating for environmental protection against dust and water jets, making it suited for outdoor and washdown environments.
Frequently Asked Questions About the Mecline MV60 Flow Switch
Is the Mecline MV60 easy to install? For anyone familiar with pressure washer plumbing and burner control circuits, installation is straightforward. The 3 8 FPT connections match standard fittings, and the 2-wire electrical hookup is simple. If you're new to hot-water machine work, follow the manufacturer's guidance or contact a qualified technician for help.
How do I know whether I need the horizontal or vertical version? Look at the pipe orientation where the switch will be mounted. If the pipe runs horizontally, choose the MV60H. If it runs vertically, choose the MV60V. Using the wrong version can cause the internal piston to stick or fail to return, leading to unreliable burner control.
Can the Mecline MV60 be used with detergents or chemicals? The MV60 is primarily designed for water in pressure washer applications. If your system runs aggressive detergents or chemicals through the hot-water circuit, confirm material compatibility with the chemical supplier before use. The brass body and internal components may not be suitable for all chemical formulations.
Ready to Improve Burner Control With the Mecline MV60?
If your hot-water pressure washer suffers from inconsistent burner firing, delayed hot water, or you're replacing a worn-out flow switch, the Mecline MV60 offers a proven, mechanically simple solution. Its flow-based design ensures the burner fires only when water is actually moving-protecting your coil, improving operator experience, and keeping your machine running reliably day after day.