Filtre d'entrée DURAVIEW 1/2MPT, ports 1/4"
Filtre transparent le plus puissant Raccord de tuyau d'arrosage intégré Conception fluide Couvercle en plastique transparent
Impossible de charger la disponibilité de la réception
The Duraview Inlet Filter - a vital component for General Pump's Duraview series. This thing is a must-have if you want to protect your pressure washer pump from all the gunk that can cause it to go down the tubes.
You stick this filter on the suction side to stop dirt, grime and other nasty stuff from getting into the pump. And trust me, that's a big deal if you want to make your pump last a long time - especially when it comes to the seals and valves.
What you can expect from the Product
This filter is perfect for mid-level pressure washers - it can handle up to 8 GPM (that's gallons per minute, for the uninitiated) and can take a maximum of 150 PSI without getting its knickers in a twist. It also handles water up to 180 degrees Fahrenheit, which means you can use it with warm or hot water - just be careful not to boil it.
The Duraview Housing and Bypass Ports: The standout feature here is the clear plastic housing that lets you see what's going on inside without having to take it apart. This makes it super easy to check if the filter screen is clogged with dirt and debris - so you can just swap it out and get back to work. And if you need to route some extra water supply lines or other accessories, the two 1/4" bypass ports are a godsend.
All about those connections: The inlet's got a 3/4" FGH connector, so you can just hook it up to a standard garden hose. The outlet uses a 1/2" MPT, which is pretty standard for professional-grade pressure washer pumps. Plus, the inclusion of some extra 1/4" ports gives you loads of flexibility when it comes to routing water and other bits and bobs.
Key Features of this Filter
This reliable pre-filter's got some awesome features that'll protect your pump from harm:
-
Product: Duraview Inlet Filter
-
MFG: Made by General Pump
-
GPM: 8 GPM
-
PSI: 150 PSI
-
Temperature: 180°F
-
Inlet: 3/4" FGH
-
Outlet: 1/2" MPT
-
Bypass: 2 X 1/4"
How to Install and What to Expect
This filter's built to last - even if you're running it 24/7. Just keep an eye on that internal screen and clean it every now and then, and you'll be fine. This filter's a top choice for anyone looking to up their pressure washer game - just add it to your shopping cart and you're golden.