Centurion CTB4S Pump Made Ready 5.5GPM 3500PSI - 1682

Specifications

SKU: 1682

SHAFT

24 mm

INLET

3/4" GHF

MFG

Centurion

MFG MODEL NO

CTB4S

WT

30 lbs

Outlet

3/8" QC

PSI

3500

GPM

5.5

RPM

1450

MAX TEMPERATURE

140°F

DON'T SEE IT? We can get it! Not sure if this product is right for you, or if there are alternatives? Speak to our sales department:

Call: 1 (800) 676-0607 Email: orders@barens.com

What This Made-Ready Assembly Delivers

The Centurion CTB4S made-ready pump with VRT3 310EZ unloader is a pre-plumbed, bolt-on triplex pressure washer pump assembly that pairs a 3,500 PSI / 5.5 GPM belt drive pump with a trapped-pressure unloader rated for up to 4,500 PSI and 10.5 GPM.This PMR part ships with the unloader, bypass plumbing, thermal relief valve, and fittings already mounted, so professionals can drop it into a skid, trailer, or cart frame and start washing the same day. Instead of sourcing and aligning each component separately, the made-ready configuration handles that work at the factory level.

What Makes This CTB4S + VRT3 310EZ Package Different

Most pressure washer builds start with a bare pump and a box of loose fittings. The builder has to match the unloader's flow and pressure range to the pump, source the correct bypass hose diameter, orient everything to fit the frame, and hope the port threads line up. Each of those steps is a potential failure point.

  • Factory-matched components – The CTB4S operates at 1,450 RPM via a belt drive, producing 3,500 PSI at 5.5 GPM. The VRT3 310EZ is rated for up to 4,500 PSI and 10.5 GPM. That 1,000 PSI overhead means the unloader operates well within its rated range, keeping internal components under less stress and extending service life.

  • Pre-mounted and oriented unloader – Inlet, outlet, and bypass ports are already aligned to standard hose routing. The P8 features an external unloader for easy service, so future replacement or rebuild of the VRT3 310EZ does not require pulling the pump off the frame.

  • Reduced install time vs. separate parts – A shop assembling pump, unloader, bypass, and relief valve from individual parts typically spends 30 to 60 minutes on plumbing and testing. The made-ready unit cuts that to connection and verification only.

  • Field-proven VRT3 310EZ – This unloader uses a forged brass body with reduced porosity, a hex-design shutter valve that reduces wear from binding, and improved spring material for vibration resistance. Its color-coded black spring indicates high pressure capability at a glance.

  • Optimized for triplex performance – Bypass routing and pressure settings are designed around triplex operation, minimizing pressure spikes when the trigger closes and reducing chatter during transitions between spray and bypass modes.

Product Details: CTB4S Pump Made Ready VRT3 310EZ

  • Pump model and type: Centurion CTB4S (also designated Centurion P8), triplex plunger pressure washer pump in a made-ready assembly

  • Maximum pressure: 3,500 PSI, rated for continuous heavy use in commercial and industrial settings

  • Flow rate: 5.5 gallons per minute

  • Drive type: Belt drive design; the pump operates at a controlled speed of 1,450 RPM

  • Shaft size: 24 mm, compatible with common commercial engine and motor pulleys

  • Inlet port: 3/4" Garden Hose Fitting (GHF)

  • Discharge port: 3/8" brass quick-connect

  • Maximum inlet water temperature: 140 °F (60 °C)

  • Manifold material: Nickel plated brass; the adjustable manifold type resists chemical corrosion from cleaning solutions

  • Plungers: Ceramic; ceramic inlet size and plunger hardness resist heat buildup and abrasive wear

  • Oil capacity and type: 32 fl oz of 30W non-detergent oil

  • Unloader: VRT3-310EZ trapped-pressure unloader with built-in EZ Start valve; rated for up to 4,500 PSI and 10.5 GPM; 3/8" FNPT inlet, outlet, and bypass ports

  • Included in the made-ready package: CTB4S pump, VRT3 310EZ unloader (mounted), bypass hose/plumbing, thermal relief valve, fittings and plugs

  • Compatibility: Mounting pattern and shaft suit common commercial gas engines and electric motors used on skid units, trailers, and carts

Frequently Asked Questions

Is the CTB4S made-ready unit difficult to install? Most professional shops mount and connect it in under an hour. The VRT3 310EZ unloader, bypass, and thermal relief valve arrive pre-installed, so the work is limited to bolting the pump to the frame, aligning the belt drive, and connecting three hoses: inlet, outlet, and bypass return.

Can I use the VRT3 310EZ to lower pressure for more delicate work? Yes. The unloader's adjustment knob lets operators reduce output pressure within the pump's operating range. This suits lighter tasks like washing painted surfaces, vehicles, or trucks without risking damage. Lock the dual nuts after setting to prevent vibration from shifting the adjustment.

How do I know if my engine or motor can drive the CTB4S correctly? Check that your power source delivers enough horsepower at 1,450 RPM to handle the pump's flow and pressure load. The 24 mm shaft must match your coupling or pulley setup. Consult the engine or motor documentation for output curves at the target RPM.

Build or Upgrade Your Pressure Washer With the CTB4S

The Centurion CTB4S made-ready pump with VRT3 310EZ unloader delivers 3,500 PSI at 5.5 GPM in a pre-plumbed package built for professionals who value precision, easy maintenance, and durability over assembly-line headaches. The belt drive design at 1,450 RPM keeps the pump running safely and cool under sustained load, while the VRT3 310EZ provides reliable pressure control across job types from concrete restoration to fleet washing.