High-Pressure Belt Drive Triplex for Industrial Cleaning
The Centurion CTB2S is a heavy-duty, belt-drive triplex pressure washer pump that delivers 4,100 PSI at 8.5 GPM - built to handle the toughest commercial and industrial cleaning jobs with the kind of reliability that keeps your operation running day after day.
What Makes the CTB2S Different
Most pressure washer pumps on the market - especially direct-drive, light commercial units - spin fast, run hot, and burn through seals under sustained use. The CTB2S takes a fundamentally different approach, prioritizing endurance, efficiency, and long term reliability under real industrial demand.
-
True low-RPM belt drive design – The P10 operates at a low RPM of 1,750 for reduced wear. Compare that to common direct-drive pumps spinning at 3,400+ RPM. Lower speed means less friction, less heat, and dramatically less vibration - all factors that directly extend pump life and reduce maintenance costs.
-
Triplex ceramic plungers and brass manifold – The Centurion P10 features a brass manifold for durability, paired with triplex ceramic plungers for extended lifespan. Brass resists corrosion far better than cast iron or alloy alternatives, while ceramic plungers handle hard water and abrasive contaminants without degrading. This combination of materials reflects precision engineering built around the demands of continuous industrial systems.
-
Engineered for continuous-duty, not hobby use – Everything about this triplex pump - from the external unloader and thermal relief valve placement to the oversized crankcase and accessible component layout - is designed for multi-shift operations and long washing cycles. It is suitable for heavy rinsing and stubborn grime removal in demanding environments where lighter pumps simply won't survive.
Product Details: Centurion CTB2S Pump Specifications
-
Type and configuration: Triplex high pressure plunger pump in a belt drive configuration, optimized for 1,750 RPM operation. Sold as a bare pump - must be paired with an external power source (gas engine or electric motor).
-
Performance: Maximum working pressure of 4,100 PSI; maximum flow rate of 8.5 GPM. It is engineered for high-flow, high-pressure cold-water pressure washing systems. The flow supports multi-gun and surface cleaner setups.
-
Key components and materials: Brass manifold; 3 ceramic plungers; hardened, forged crankshaft; precision-ground valves; oil-filled crankcase with a 37 fl oz oil capacity for superior lubrication using 30W non-detergent oil.
-
Connections: Inlet uses a 3/4" garden hose fitting (ceramic inlet size standard). High pressure discharge uses a 3/8" brass quick-connect. Shaft size is 24 mm for pulley mounting.
-
Temperature capability: Maximum inlet temperature is 74°C (165°F), making it compatible with warm water systems for enhanced cleaning power.
-
Weight: Approximately 40 lbs (bare pump).
-
Warranty and testing: The Centurion CTB2S is backed by a 7-year warranty. Each unit is pressure-tested, flow-verified, and calibrated at the factory before shipping.
Frequently Asked Questions About the Centurion CTB2S Pump
Is the CTB2S pump easy to install? For a qualified technician, installation is straightforward. You'll mount the bare pump to a rigid frame, align the belt drive pulleys to your gas engine or electric motor, set proper belt tension, and connect inlet and outlet plumbing (3/4" inlet, 3/8" outlet). Fill the crankcase with 37 fl oz of 30W non-detergent oil. The P10's layout allows quick access to key components like the external unloader and soap injector. Most experienced technicians complete the installation in a couple of hours.
What kind of engine or motor can I use? The CTB2S works with both gas engines and electric motors sized to deliver sufficient torque at 1,750 RPM. The drive type and pulley ratio should be calculated so the pump is not over-sped. Typical applications pair it with motors in the 40–50 HP range depending on belt transfer losses and specific application demands.
Can it run continuously? Yes. Designed for continuous-duty use in demanding environments, the CTB2S handles extended operation when installed correctly. Requirements include a steady supply of clean inlet water at or below 74°C, a properly functioning thermal relief valve to prevent overheating during bypass operation, correctly calibrated system pressure via the external unloader, adequate ventilation for cooling, and regular oil level checks.
Ready to Upgrade Your Pressure Washing System?
If you're running a light-duty pump that overheats, vibrates, or can't maintain consistent pressure through a full shift, the CTB2S is a direct upgrade in every category that matters. Higher pressure, 8.5 GPM flow, cooler low-RPM belt drive operation, and industrial-grade components deliver the perfect balance of power and endurance for demanding commercial and industrial work.