3/8" 600 PSI Delta Plated Brass Ball Valve with Lever

Getting High-Flow Control Without Sacrificing Performance

The 3/8" 600 PSI Delta Plated Brass Ball Valve with Lever is built for the pros - techs and builders who demand performance, durability and pressure tolerance in a compact package. Perfect for smaller lines and fine-control systems, this valve fits snugly into tight system layouts with no compromise on operation.

At 600 PSI, this valve doesn't hold back - its precision-machined ball and corrosion-resistant delta-plated brass body make short work of demanding environments, whether it's plumbing, industrial machinery, or high-pressure washers. It gives you smooth flow, tight sealing and long-term reliability all in a compact footprint.

The Compact 3/8" Valve - Ideal for Fine Routing and Tight Spaces

The 3/8" size is the key to unlocking space-saving solutions in your build. It's just big enough to do the job but small enough not to get in the way, making it perfect for:

• Injector circuits and bypass lines - where space is a premium

• Fine equipment routing and auxiliary branches - where precision matters

• Pump inlet/outlet accessories - where size really counts

• Compact pressure washer builds - where space is limited

• Industrial machinery with tight component spacing - where room to breathe is a luxury

• Smaller tanks, reels and manifolds - when every inch counts

• OEM assemblies requiring lightweight valves - when size is everything

This valve may be small but it still packs a 600 PSI punch, allowing you to use it across high-pressure systems without sacrificing performance or safety.

Premium Brass Construction for Top-Notch Strength and Longevity

This valve is built on a foundation of high-quality brass - a material that's a cut above when it comes to strength, corrosion resistance and reliability. Brass naturally withstands moisture, cleaning chemicals, temperature variance and high-cycle operation, making it a trusted choice for indoor and outdoor installs.

Brass has got loads of benefits including:

• Fantastic corrosion protection over time

• Reliable sealing properties under high pressure

• Strong structural stability with minimal deformation

• A long service life in demanding environments

• Predictable machining and threading quality

When combined with precision internal shaping and polished sealing surfaces, the brass body guarantees consistent operation across thousands of open-and-close cycles.

Delta-Plated Exterior for Added Protection & Longevity

Delta plating is the icing on the cake when it comes to corrosion protection. This added layer strengthens the valve against:

• Oxidation and weathering

• Frequent exposure to detergents or chemicals

• Surface corrosion

• Abrasion during installation and daily use

Delta plating also keeps your valve looking its best for years to come, even under heavy use.

Precision-Machined Ball Mechanism for Smooth, Accurate Flow

The internal ball is precision-polished, balanced and designed to move smoothly within the valve housing, giving you tight, consistent control. This means:

• Smooth rotation with minimal friction

• Reliable full closure in the shutoff position

• Low-turbulence flow when fully opened

• Predictable behaviour under pressure

• Easy operation using the steel lever handle

The compact 3/8" size doesn't compromise on precision - it allows highly efficient flow for smaller lines and fine-control systems.

Built for Demanding Professional Applications

Even at 3/8", this ball valve features the same rugged engineering as larger commercial-grade valves:

• Thick brass walls for pressure stability

• High-quality seals for leak-free operation

• Robust lever and stem assembly

• Tight tolerances between the ball and housing

• Low internal friction to extend service life

This means it can withstand vibration, pressure spikes, daily use and repeated actuations across commercial, industrial and mechanical tasks.

Ideal for a Wide Range of Applications

Thanks to its compact size and 600 PSI pressure rating, this valve is perfect for:

• Pressure washer injector systems

• High-pressure water routing

• Industrial fluid control circuits

• Chemical feed lines (compatible chemicals only)

• Agricultural sprayers

• Commercial plumbing and equipment

• Pump accessories and auxiliary controls

• OEM manufacturing requiring small-scale valves

This valve is widely used in precision systems, making it a trusted choice among manufacturers and service pros looking for accuracy and compactness.

Tight Tolerances for Leak-Free Operation

One of the real benefits of this 3/8" valve is its finely machined components. The threading, port alignment, and ball surface finish are all crafted to deliver predictable sealing and minimal wear, even after heavy use. This consistency is crucial in high-pressure or small-diameter systems where even slight irregularities can impact performance.

The steel lever provides strong mechanical advantage for firm, positive actuation whether your valve is installed in open, accessible places or tucked into tight machinery frames.

Why Techs Choose This 3/8" Brass Ball Valve

Professionals have come to rely on this valve for a whole host of reasons, but among the key advantages are:

• 600 PSI high-pressure capability - this valve can handle some pretty tough demands\

• It's nice and small, 3/8" in size, which is a big help when space is at a premium

• Built to last, the brass construction is highly resistant to corrosion, so you can be confident it'll keep on working for years to come.

• We've also given it some extra protection in the form of delta plating, which really helps extend its lifespan

• And operating it is a breeze too - the ball operation is incredibly smooth & reliable

• It's also got low restriction flow for its size, so you can get the job done quickly and efficiently - even in tight spaces

• Plus, when it comes to installing it, you'll find that standard fittings work just fine

• And one thing you can always count on - it'll deliver consistently solid performance in everything from commercial to industrial systems

If reliability, precision, and not taking up too much space are the top priorities for you, then this valve is the perfect, no-nonsense solution for the job

A Compact Valve That Just Delivers

The 3/8" 600 PSI Delta Plated Brass Ball Valve with Lever really is the full package - it's got all the key qualities that pros are looking for : durability, corrosion resistance, a smooth operating system, and a precision fit that takes up hardly any space. It's the kind of valve that really does stand out as a great choice for busy builders, skilled repair technicians and equipment makers.