Centurion TK2 240° Rotating Tank Head Cleaner, 1/2" Inlet, 5 to 16 GPM, 3,600 PSI, 212°F, Built to Order

Centurion TK2 Tank Head Cleaner: Powerful 3D Cleaning in Tough Tanks

The Centurion TK2 is a high-impact, fluid-driven rotary tank head cleaner supplied by Barens, engineered to deliver automated, thorough cleaning inside industrial and sanitary tanks without sending anyone through a manhole. It handles the dirty work as an efficient tank cleaning head - blasting away product heel, sludge, oils, and dried coatings - while slashing water, chemical consumption, and manual labor. Whether you're dealing with medium-sized tanks, large vessels, or tanks up to 100 ft in diameter, the TK2 delivers repeatable cleaning results when paired with the right Centurion high-pressure pump. It's built to integrate seamlessly with Barens' complete range of tank cleaning systems and skids, so you can drop it into your existing setup and get to work.

Most tank cleaning solutions on the market force you to choose between adequate coverage and practical flow rates. The Centurion TK2 sits right in the sweet spot - enough impact to strip tough residues off every tank surface, enough flow to get it done fast, and enough durability to keep running shift after shift. If you're tired of climbing into tanks with a spray wand or watching static spray balls waste water and time, this upgrade pays for itself.

Why You'll Love the Centurion TK2 Tank Head Cleaner

Results on the tank wall matter more than specs on a sheet - and this tank cleaning head delivers them. You get cleaner tanks faster, safer operations with less confined-space entry, and repeatable cleaning cycles you can count on every single time.

Slash tank downtime – The TK2 cuts typical tank cleaning cycles from hours of manual entry and hand-spraying down to targeted runs measured in minutes. Automated tank cleaning systems reduce downtime and operating costs, and the TK2 is no exception. Rotary jet cleaners can achieve cleaning cycles under 2 minutes for light rinsing, and even heavy soils come clean in a fraction of the time you'd spend with a wand.

Reduce water and chemical use – Expect up to 50–70% less water and detergent compared with manual spray wands or static spray balls, depending on your setup and residue type. Using a mechanical rotating head optimizes water and chemical usage because every drop goes exactly where it needs to go - not spraying the ceiling while the floor stays filthy. Tank cleaning nozzles improve efficiency and reduce water use across the board.

Reach every internal surface – The TK2 delivers complete coverage across sidewalls, domed roofs, cone bottoms, and around internal fixtures when properly positioned. Controlled rotation allows the TK2 to maintain effective dwell times on surfaces during cleaning, ensuring nothing is missed. Rotary nozzles provide 360-degree coverage for effective cleaning - a massive step up from static spray balls that leave shadow zones everywhere.

Handle stubborn residues – This head is built for tough residues: product heel, dried coatings, oils, fats, or sludge. High-pressure nozzles remove hardened deposits such as oil sludge, and the TK2 does so without requiring someone to stand inside the tank with a scraper. Tank cleaning systems can handle all kinds of residues efficiently when you pair the right head with the right pressure and flow.

Built for continuous duty – Rugged construction, long service intervals, and compatibility with demanding industrial schedules mean this isn't a one-season piece of equipment. The TK2 cleaning head is made of 316 stainless steel, resistant to harsh chemicals, so it holds up under aggressive cleaning solutions and harsh environments alike.

Simple to operate and repeat – Once installed, operators can run pre-set cleaning cycles with minimal adjustment between batches. No retraining, no guesswork, no variability between shifts. Specialized tank head cleaners automate the cleaning process, enhancing safety by reducing the need for manual entry into hazardous environments.

What Makes the Centurion TK2 Tank Cleaning Nozzles Different

A lot of generic rotating heads and rotating nozzles out there waste fluid, leave shadow zones on the tank wall, or need rebuilding after a few hundred hours. The Centurion TK2 is engineered to fix every one of those problems, and it does it at pressures and flow rates you can actually achieve with your plant equipment.

True 3D rotary jet pattern – Among rotary jet heads built for higher-impact cleaning, the TK2's controlled rotation generates a repeatable, indexed cleaning pattern that progressively scours every area of the tank. Unlike static spray balls that just flood the interior and hope for the best, TK2's powerful jets trace overlapping paths that ensure no dead spots. Static spray balls require more liquid for effective cleaning - the TK2 does more with less. It uses controlled rotation to provide targeted 240° coverage, and as the head indexes through its rotation cycle, it builds up to cover the entire interior.

High-impact jets at realistic pressures – The TK2 is rated for high pressures up to 3,600 PSI. That's not some lab-test number you'll never reach in the field - it's right in the wheelhouse of Centurion high-pressure pumps. You get significant impact at the pressures and flow rates your equipment actually delivers, which means faster removal of contaminants and residue without needing multiple passes.

Optimized for Barens and Centurion systems – The TK2 pairs especially well with Centurion high-pressure pumps, making sizing and integration straightforward. The cleaning head can accommodate flow rates of 5–16 GPM, which lines up perfectly with common Centurion pump configurations. No guesswork on compatibility - just match the pump to the tank and go.

Serviceable, not disposable – Replaceable seals, bearings, and nozzles mean you rebuild heads rather than tossing entire units. This is what separates a serious piece of equipment from the throwaway stuff. Seal kits, nozzle sets, and rebuild kits keep your TK2 performing like new for years without the cost of full replacement.

Engineered for harsh environments – the 316 stainless steel body resists aggressive chemicals, and the TK2 can operate at temperatures up to 212°F. Whether you're running hot caustic washes, acidic cleaning solutions, or standard CIP detergents, this head is built to take it.

How the Centurion TK2 Fluid Driven Tank Head Cleaner Works

The Centurion TK2 is a self-rotating, hydrokinetic spray head - here's what that means in plain terms, from hookup to clean tank.

1. Connect to your wash system – The TK2 mounts through a tank nozzle or manway using standard ½″ threaded connections. Hook it up to a high-pressure line driven by a Centurion pump or compatible pump skid. It features an integrated inlet filter to prevent clogging, so debris in your cleaning fluid won't jam the works before it even starts.

2. Fluid power drives the rotation – Cleaning fluid enters the body under pressure, passes through precision nozzles, and uses reaction force combined with internal gearing to rotate the head on two axes. No external motor, no electrical connections inside the tank - just liquid pressure doing the work. This fluid-driven design keeps things simple and eliminates ignition sources in hazardous environments.

3. Indexed jet pattern covers the tank – As the head slowly rotates, overlapping jets trace a pre-set pattern that ensures complete coverage over a defined number of cycles. This isn't random spraying - it's a calculated, indexed path that hits every square inch of tank surface. The rotation speed keeps the dwell time consistent throughout the interior, so cleaning is uniform from top to bottom.

4. Impact breaks down residues – High-velocity jets strike the internal surfaces with serious force, dislodging product buildup and rinsing solids, sludge, and contaminants toward the outlet or sump. The TK2 is engineered for high efficiency, achieving up to 95% cleaning efficacy under proper conditions. Higher pressures and matched flow rates result in faster residue removal, even from baked-on or dried deposits.

5. System drains and resets – After the programmed run time, pumps are stopped, the tank drains, and the TK2 is ready for the next clean-in-place or wash cycle. The design is self-cleaning for hygienic, residue-free operation with minimal manual intervention. No manual intervention between batches unless you want to adjust cycle time or pressure. Rinse and repeat - literally.

Product Details: Centurion TK2 Tank Head Cleaner Specifications

Here are the key specs for easy reference and planning:

Construction materials: The TK2 cleaning head is made of 316 stainless steel, resistant to harsh chemicals. Internal non-metal components use high-performance engineering plastics for wear resistance. Seals are compatible with standard CIP cleaning solutions, with optional materials available for aggressive chemicals or higher temperatures.

Operating pressure range: The TK2 is rated for high pressures up to 3,600 PSI. Typical working range starts from moderate pressures suitable for routine rinsing up through serious high-pressure applications for heavy soils and tough residues. Pairs directly with Centurion pump outputs in the 3,000–4,000 PSI range.

Flow rate range: The cleaning head supports flow rates of 5–16 GPM, making it suitable for configurations ranging from a single 4 GPM Centurion pump to larger, multi-head cleaning systems. Nozzle sizing determines optimal flow for your specific tank and residue type.

Maximum tank diameter: Tank cleaning nozzles can clean tanks up to 100 ft in diameter with the right pump and configuration. Rotary jet cleaners are suitable for tanks up to 50 meters in diameter. For small, medium-sized, and large tanks alike, the TK2 scales accordingly.

Spray pattern and coverage: It utilizes controlled rotation to provide targeted 240° coverage per rotation plane. As the head indexes through its cycle, the overlapping jet paths build up to complete coverage of the entire tank interior. Multiple passes per complete clean ensure that no shadowed or under-cleaned areas remain.

Connection sizes: ½″ female inlet (NPT or equivalent) for the high-pressure fluid line. Nozzle connections are 1/8″ NPT. Standard threading fits common industrial pipework and process connections without custom adapters.

Temperature and media limits: It can handle operating temperatures up to 212°F. Compatible with water, standard detergents, CIP solutions, and common industrial chemicals within its material limits. Avoid highly abrasive slurries or solvents that attack standard seal materials - upgraded seal options are available for aggressive chemistries.

Weight and dimensions: Approximately 13.7 lbs (6.2 kg). Compact enough to fit through standard manways and nozzle ports in most process tanks and storage tanks.

What's included: Assembled rotary jet head, nozzle set as ordered, integrated inlet filter, mounting and connection hardware, and a Barens operation and maintenance guide.

Service and support: Seal kits, rebuild kits, replacement nozzle sets, and technical support are available directly through Barens. Heads are designed for field-level maintenance - no factory return required for standard rebuilds.

Who the Centurion TK2 Tank Head Cleaner Is For

The TK2 is aimed at operations where internal tank cleanliness directly affects product quality, uptime, and safety - and where manual entry is either too slow, too risky, or both.

Industrial wash and process tanks – Mixing vessels, storage tanks, day tanks, and containers handling oils, chemicals, slurries, coatings, or process intermediates. If you're cleaning tanks with stubborn residue and tight turnaround windows, TK2 delivers.

Food processing and beverage production – Process tanks, syrup vessels, fermentation tanks, ingredient silos, and CIP-ready equipment requiring hygienic design. The 316 stainless construction and smooth, cleanable surfaces make it suitable for food and beverage cleaning regimes when installed correctly and validated. Tank cleaning solutions effectively handle various types of residue in these environments.

Fleet, waste, and environmental services – Tanker trailers, vacuum trucks, waste oil or sludge tanks, and dewatering equipment where heavy residues are common. High-pressure nozzles remove hardened deposits like oil sludge - the kind of stuff that laughs at a garden hose.

Agriculture and feed operations – Fertilizer tanks, feed mixing tanks, and washdown systems paired with Centurion pumps on mobile or skid units. Rotary nozzles improve cleaning efficiency compared to static spray balls, and the TK2 addresses the cleaning challenges unique to agricultural chemicals and feed ingredients.

Maintenance and reliability teams, including plant engineers responsible for uptime, benefit from standardized, repeatable tank-cleaning tools rather than manual entry. The TK2 replaces variability with consistency - same cycle, same results, every time.

If you need faster, safer, repeatable tank cleaning with lower operating costs and reduced exposure to hazardous environments, the Centurion TK2 is a strong fit.

How to Select and Set Up Your Centurion TK2 Tank Head Cleaner

Getting the right head into the right tank with the right pump behind it is the difference between excellent cleaning results and mediocre ones. Here's how to nail the setup.

Match TK2 to tank size and residue – Start with your tank diameter, height, and the type of soil you're dealing with. Light rinsing of water-soluble residues at low pressure is a different job than blasting dried coatings or sludge off a 60-foot-diameter storage tank. Tank diameter and residue type drive your choices in pressure, flow, and nozzle size. For very large tanks, you may need multiple heads or higher-capacity pump configurations.

Pair with the right Centurion pump – Choose one that delivers the flow rates and pressure your cleaning application demands. A 4 GPM Centurion pump at 4,000 PSI is a solid starting point for many different tank sizes and cleaning challenges. Verify that the available cleaning units (PSI × GPM) are sufficient for your target tanks - bigger tanks and tougher soils need more energy at the nozzle.

Position the head correctly – For vertical tanks, install TK2 through the top-center nozzle for optimal coverage of the sidewalls, dome, and bottom. For horizontal tanks, side entries work, or use retractable lances when permanent installation isn't practical. Avoid positions where internal baffles, agitators, or pipes block the jet paths - shadowed areas won't get clean.

Connect the fluid supply – Run your high-pressure line from the Centurion pump to the TK2 inlet. Include isolation valves, strainers or filters upstream of the head (in addition to the integrated inlet filter), and safety devices such as pressure relief and thermal protection on the pump side. Clean supply fluid extends seal life and prevents nozzle blockages.

Program or time the cleaning cycle – Set run times to complete the required number of rotational cycles based on tank size and contamination level. Heavier soils and larger tanks need more cycles. The TK2's indexed pattern ensures that if you run enough cycles, you achieve complete coverage - no guessing.

Perform initial test runs – Run a trial cycle, inspect coverage (where possible), and adjust pressure, flow, or cycle length to eliminate any shadowing or under-cleaned areas. Dial it in once, and you've got a repeatable process for every batch.

Keeping Your Centurion TK2 Tank Head Cleaner Running for Years with Reduced Water Usage

Routine care prevents unplanned downtime and preserves the cleaning performance you paid for. The TK2 will reward even basic maintenance with years of reliable service.

Daily and weekly checks – Quick visual inspections between shifts or batches: look for leaks at the inlet and nozzle connections, verify that the head rotates freely, and check for unusual vibration or noise. Clear any nozzle blockages immediately - a plugged nozzle means a missed strip of tank wall.

Protect the internals with a clean supply – keep strainers and filters at the inlet clean and in good condition. Avoid running abrasive solids or particulate-heavy liquid through the head. Use cleaning solutions compatible with the TK2's material limits to prevent seal corrosion or degradation.

Scheduled servicing – Plan maintenance intervals for inspecting or replacing seals, bearings, and nozzles based on operating hours, cleaning frequency, and chemical aggressiveness. Seal and bearing wear is the leading cause of reduced performance - catching it early prevents bigger problems.

Seasonal and long-term storage – Drain the head and flush with clean water after the last use of the season. Use antifreeze or corrosion inhibitors when systems are idle in cold or humid environments. Store in a dry, protected location away from UV exposure.

Troubleshooting common issues: Loss of impact usually indicates low pressure or worn nozzles. Incomplete rotation points to internal bearing wear or debris in the gearing. Pattern streaks or missed areas indicate blocked nozzles or incorrect positioning. Most issues are solved with a seal kit, nozzle replacement, or a quick adjustment to the supply pressure.

Access to Barens parts and support – Barens provides TK2 parts, rebuild kits, and technical guidance to restore heads to original performance. Keep a spare seal kit on hand - it's cheap insurance against unplanned downtime.

Frequently Asked Questions About the Centurion TK2 Tank Head Cleaner

How difficult is installation? Most maintenance or project teams can install the TK2 using standard pipework and fittings, especially when integrating with existing Barens or Centurion pump systems. The ½″ threaded inlet and compact form factor fit standard manways and nozzle ports. No special tools or welding required for typical installations.

What tank sizes can TK2 handle? A single TK2 head is effective in medium-sized tanks, large tanks, and large vessels. Tank cleaning systems can clean tanks up to 100 ft. in diameter with the right pump and configuration, and rotary jet nozzles are suitable for tanks up to 50 meters in diameter. For very large tanks or tanks with complex internals, multiple heads or higher-capacity pumps may be needed.

Can it be used in hygienic applications? Yes. The 316 stainless steel construction and smooth, cleanable surfaces allow TK2 to be incorporated into hygienic cleaning regimes in food processing, beverage, and pharmaceutical operations when installed correctly and validated by the user.

Does it work with hot water and detergents? The TK2 can handle operating temperatures up to 212°F and is compatible with common tank-cleaning detergents and CIP solutions within its material limits. For extremely aggressive chemicals, upgraded seal materials are available.

How long will a TK2 head last? Service life depends on operating hours, pressure, temperature, and chemistry, but the TK2 is designed for multi-year use with periodic maintenance and rebuilds. Keeping the supply fluid clean and replacing seals and nozzles on schedule is the key to maximizing lifespan.

What happens if the head is run at low pressure? Rotation will still occur, but jet impact and cleaning distance are reduced. For light rinsing or routine rinsing of easily removed residues, lower pressure may be adequate. For heavy soils and tough residues, higher pressures and matched flow rates deliver the efficiency the TK2 is designed for.

How do I get replacement parts? Order TK2 spare parts and rebuild kits directly through Barens or authorized distributors. Barens support can help identify the correct components for your specific head configuration and application.

Ready to Upgrade Your Tank Cleaning with Centurion TK2?

Stop sending people into tanks with spray wands, and stop wasting water and chemicals on static spray balls that can't do the job. The Centurion TK2 Tank Head Cleaner delivers faster, safer, more consistent tank cleaning - reducing water, chemical consumption, and labor while achieving up to 95% cleaning efficacy. It's the tank cleaning solution built for operations that can't afford downtime or compromise on cleanliness.

Replace your manual cleaning process with a robust Centurion TK2 tank head cleaner powered by a matching Centurion pump. Contact Barens today for a sizing consultation, or add the TK2 to your tank-cleaning system and start seeing the difference in your next wash cycle.