Protect the Heart of Your Pump
General Pump Kit 28 Packing is a 20mm packing and seal assembly kit engineered to rebuild a single pump cylinder in compatible General Pump and Interpump Series 47 and 48 high-pressure triplex plunger pumps. By replacing worn seals, O-rings, and support components, the kit restores sealing integrity, prevents water leakage along the plunger shafts, and helps maintain consistent operating pressure across commercial and industrial cleaning applications.
What Makes General Pump Kit 28 Packing Different
Generic seal assortments and universal packing sets often require trimming, improvisation, or simply leave out critical support hardware. Kit 28 is built differently:
-
Matched components engineered for specific General Pump and Interpump models – Every seal, ring, and retainer is dimensioned to the exact bore, thread, and retention geometry of Series 47/48 pumps with 20 mm plungers. OEM-level fit eliminates guesswork and reduces the risk of early failure.
-
Balanced combination of high-pressure and low-pressure sealing elements – The kit is designed as a system. Low-pressure inlet seals and high-pressure discharge packings work together to manage the dual stresses a triplex plunger pump generates on every stroke.
-
Materials selected for high-pressure, high-temperature cleaning applications – Brass components are included in the kit for structural rigidity under pressure, while engineered elastomer packings resist heat, detergents, and repeated thermal cycling.
-
Supports professional rebuild standards – Part numbering and layout follow the manufacturer's service diagrams, so technicians can trace each component to an item number in the pump manual and verify correct reassembly.
-
Clear cylinder-specific packaging – Each Kit 28 typically services one cylinder. Need to rebuild all three cylinders of a triplex pump? Order three kits. This clarity helps technicians plan parts accurately.
Product Details:
A quick-reference summary of what you're getting and what it's designed for:
-
Material / Construction – Reinforced elastomer packing rings, engineered O-rings, and brass support/retainer components built to withstand high-pressure water, heat, and common cleaning detergents.
-
Intended use and pressure range – Kit 28 is a 20mm packing and seal assembly kit designed for General Pump and Interpump brand pressure washers.
-
Compatibility – Kit 28 is compatible with General Pump and Interpump Series 47 and 48 pumps, including popular models in the T, TS, W, and WS families. Each kit services one pump cylinder.
-
Included components:
-
High-pressure packing rings
-
Low-pressure seal (20 mm)
-
Intermediate and head rings
-
O-rings for pump cylinder rebuilding
-
Brass packing retainer and support pieces
-
-
Operating conditions and fluid compatibility – Suitable for both hot and cold water applications. Compatible with standard detergents, alkaline cleaners, and mild acid solutions commonly used in surface and vehicle cleaning. Avoid harsh solvents that may degrade elastomeric seals.
Frequently Asked Questions About General Pump Kit 28 Packing
How do I know if Kit 28 fits my pump model? Check the model plate on your pump and cross-reference it with the official General Pump or Interpump compatibility chart. Kit 28 fits Series 47/48 pumps with a 20 mm bore. If your model appears on the compatible list, you're set.
Can I install General Pump Kit 28 Packing myself? Yes, if you have mechanical aptitude and can follow the pump's service procedure. Basic hand tools-wrenches, sockets, and a torque wrench-are usually sufficient. Some technicians also use seal picks or soft drivers to remove and install components without scratching the brass manifold.
Will replacing packings improve low pressure problems? A worn packing assembly can cause water leakage or reduced operating pressure, so installing Kit 28 is a core step in restoring performance. However, low pressure can also stem from faulty valves, a maladjusted unloader, or inlet restrictions. Check those components too if pressure doesn't fully recover after a rebuild.
Ready to Restore Your Pump's Performance?
General Pump Kit 28 Packing gives you a direct, proven way to stop leaks, protect critical internal components, and recover full cleaning pressure on compatible General Pump and Interpump units. Every seal, ring, and brass retainer in the kit is designed to work as a system-so you rebuild with confidence, not compromise.